DT-V20L3G

Model DT-V20L3G Type Multi format LCD monitor Screen Size Type 20 wide format Aspect Ratio 16:10 LCD Panel 20" wide,active matrix TFT Effective Screen Size (W x H) 433.4 x 270.9 mm (17-1/8" x 10-3/4") Pixels 1680 x 1050 Display Colors 16.77 million Viewing Angle Horizontal 178° Vertical 178° Brightness 470 cd/m2 Contrast Ratio 700: 1 Response Time (G to G) 6 ms (TYP) Horizontal/Vertical Horizontal 31.469 kHz to 75.000 kHz Frequency (PC signals) Vertical 48 Hz - 65 Hz Depending on the signal within the range of these frequencies, some signals may not be displayable in which case, "Out of range " is shown. Applicable Standard 3G SDI (Ready) : SMPTE424M/SMPTE425M DUAL LINK HD SDI: SMPTE372M HD SDI: BTA S-004C, SMPTE292M SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525 EMBEDDED AUDIO: SMPTE299M, SMPTE272M Audio Output Internal speaker: 1.0 W + 1.0 W Operating Conditions Operating temperature 5°C to 35°C (41°F to 95°F) Operating humidity 20% to 80% (non condensing) Storage temperature -20°C to 60°C Power Requirements AC 120/220-240 V, 50/60 Hz Rated Current 1.00 A (AC 120 V) / 0.60 A (AC 220 – 240 V) Dimensions (WxHxD) With desktop stand 477 x 394.6 x 243 mm (18-7/8" x 15-5/8" x 9-5/8") (excluding protrusions) Without stand 477 x 354 x 99 mm (18-7/8" x 14" x 4") Weight Including stand 10.6 kg (23.3 lbs.) Excluding stand 7.7 kg (16.9 lbs.) Provided Accessories AC power cord, power cord holder x 1, screw x 2 ( for power cord holder) INPUT/OUTPUT TERMINALS Video VIDEO (INPUT 1) Input/output of composite signal: 2 line, BNC connector x 4, 1 V(p-p), 75 ? VIDEO (INPUT 2) * The input (IN) and output (OUT) terminals are bridgeconnected (auto termination). DVI-D (HDCP) DVI-D signal input (compatible with HDCP): DVI-D connector x 1 (compatible with DDC2B) COMPO./RGB Input/output of analog component signal/analog RGB signal: (GY, B/PB/B-Y, R/PR/R-Y) 1 line, BNC connector x 6 G/Y: 1 V(p-p), 75 ? (including sync signal) B/PB/B-Y, R/PR/R-Y: 0.7 V(p-p), 75 ? * The input (IN) and output (OUT) terminals are bridgeconnected (auto termination) EXT.SYNC (CS) Input/output of composite sync signal: 1 line, BNC connector x 2, 0.3 V(p-p) – 4 V(p-p), 75 ? (tri-level sync, negative polarity sync (bi-level), and BB) (including no video signal) * The input (IN) and output (OUT) terminals are bridgeconnected (auto termination) Audio E. AUDIO HD/SD SDI (IN 1) Digital signal input (compatible with EMBEDDED AUDIO/ E. AUDIO HD/SD SDI (IN 2) DUAL LINK signals): auto detection, 2 line, BNC connector x 2 E. AUDIO HD/SD SDI Digital signal output (compatible with EMBEDDED AUDIO signals): (SWITCHED OUT) 1 line switched out, BNC connector x 1 AUDIO ASSIGN (IN1) Analog audio signal input: AUDIO ASSIGN (IN2) 2 line, RCA connector x 4, 500 mV (rms), high impedance AUDIO ASSIGN (MONITOR OUT) Analog audio signal output: 1 line, RCA connector x 2, 500 mV (rms) External Control REMOTE (MAKE/TRIGGER) RJ-45 x1 (8-pin) REMOTE (RS-485) RJ-45 x2 (IN/OUT) (8-pin) REMOTE (RS-232C) D-sub(9-pin) x1