Skypanel S60-C

- Lamphead S60-C - Optical System: Soft Diffusion Panel - Light Aperture: 645 x 300 mm / 25.4 x 11.8" - Beam Angle: 115º (Half Peak Angle) - Weight: Manual Version: approx. 13 kg / 29 lbs - Pole Op Version: approx. 14 kg / 31 lbs - Packed Weight: Manual Version: approx. 21 kg / 46 lbs - Pole Op Version: approx. 22 kg / 49 lbs - Size w/ spigot (H x W x L): 566 x 133 x 825 mm / 22.3 x 5.2 x 32.5" - Size w/o spigot (H x W x L): 433 x 133 x 825 mm / 17 x 5.2 x 32.5" - Packed Size (H x W x L): 460 x 300 x 856 mm / 18 x 11.8 x 33.7" - Handling: Aluminium Yoke, High Strength Tilt Lock - Pole Operation Option (Pan & Tilt) - Mounting: 28 mm Spigot (Junior Pin) - Tilt Angle: +/- 90º - Lamphead Voltage Input: 48 V DC - Power Consumption: 420 W Nominal, 450 W Maximum - Lamphead Power Connection: Male 3-Pin XLR - 15 Amp (Pin 1: Negative / Pin 2: Positive) - Battery Connector: Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive) - Battery DC Voltage Range: 23 to 36 V DC - Battery Mode Light Output: 50 % of total output - White Light: 2,800 K to 10,000 K continuously variable correlated color temperature - Colored Light: Full RBG+W Color Gamut with Hue and Saturation Control - Color Temperature Tolerance: +/-100 K (nominal), +/-1/8 Green-Magenta (nominal) - Color Rendition: CRI Average > 95 - TLCI Average > 90 - Green-Magenta Adjustment: Continuously adjustable (Full Minusgreen to Full Plusgreen) - Dimming: 0 to 100 % continuous - Control: On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN network connectivity, USB-A, Art-Net - Remote Device Management (RDM*): DMX Setup, Hour Counter and Standard RDM Commands - Software Interface: Ethernet: DMX Setup, Fixture Status and Firmware Upgrade through PC, Mac USB-A: Software upgrade via flash drive - Housing Color: Blue/Silver, Black - Ambient Temperature Operation: -20 to +45ºC / -4 to +113ºF - Protection Class / IP Rating: III / IP20 - Estimated LED Lifetime (L70): 50,000 hours - Estimated Color Shift Over Liftetime +/- 5 % - Certifications: CE, CB, ENEC, cNRTLus, FCC, PSE - Power Supply Unit S60 PSU - Power Supply Input Range: 110 to 240 V ~, 50/60 Hz - Power Supply Output Range: 48 V DC - Power Input Connection: powerCON TRUE1 (Bare Ends / Schuko / Edison cables available) - Power Output Connection: Female 3-Pin XLR - 10 Amp (Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through) - Weight: 3.5 kg / 7.7 lbs - Dimension: 383 x 191 x 91 mm / 15 x 7.5 x 3.6" - Control: On-Board On/Off Switch - Mounting: SkyPanel PSU Super Clamp Adapter / Rail Mount Adapter - Certifications: CE, CB, ENEC, cNRTLus, PSE